Heavy duty aqueous base cleaner.
For cast iron and ferrous metals.
Ultra 600 is a highly concentrated immersion/Ultra 600 detergent for cast iron and ferrous metals. Not safe on Aluminum. Ultra 600 is a powerful, fast acting, penetrating biodegradable Ultra 600 cleaner/degreaser. Ultra 600 is water-based, and contains no chlorinated or petroleum solvents. Ultra 600 has no flash point, making it safer than solvents. Ultra 600 contains multiple penetrating emulsifiers that dissolve and float away even the most stubborn grease and soils. Ultra 600 is cost effective and contains no chelating agents which can significantly reduce hazardous waste and reporting requirements.
Concentration: Effective cleaner at 1-20% use-dilution for removing common soils, industrial greases and oils from a variety of surfaces. Generally, 5 gallons Ultra 600 per 50 gallons of water.
Use Temperature: Ultra 600 can be used at 130°F to 175°F.
- Form | Liquid
- Odor | Mild
- Foaming | Medium
- Rinsability | Complete
- Color | Blue-Green
- pH | 11-12
- Flash Point | None
- Biodegradable | YES
Ultra 600 meets Caterpillar Dealer, Hawthorne Machinery Company’s specifications for immersion and Ultra 600 cleaning compounds.
Ultra 600 contains alkaline silicates. Avoid contact with skin and eyes. If contact should occur, flush with water immediately for at least 15 minutes. Contact physician, especially for eyes.
- #30600 | 5 gl pail
- #40600 | 30 gl drum
- #50600 | 55 gl drum
NOTICE: The above information and recommendations concerning this product are based upon our laboratory tests and field use experience, however since conditions of actual use are beyond our control, any recommendations or suggestions are made without warranty, express or implied. Manufacturer’s and seller’s sole obligation shall be to replace that portion of the product shown to be defective. Neither shall be liable for any loss, damage or injury, direct or consequential, arising out of the use of this product.