ProMax2 safely removes rust, oil, engine, transmission and radiator fluid stains from driveways, carports, garage floors, walkways, sidewalks and patios. ProMax2 provides powerful penetrating cleaning action due to its cleaning agents, soaps, surfactants and the use of a natural acid that quickly penetrates and dissolves built-in stains from concrete surfaces. ProMax2 is specifically designed as a spot cleaner, not intended to be used as a total driveway cleaner. ProMax2 should be applied to pre-cleaned and dry surfaces that show rust or embedded oil and fluid stains. Use ProMax1 Driveway Cleaner/Degreaser to free surface from oils.
1. Surface should be pre-cleaned by using ProMax1 Driveway Cleaner/Degreaser to remove excess oils and greases.
2. Allow driveway to dry completely before applying ProMax2.
3. Apply ProMax2 directly to the stain to be removed. Allow the natural activating cleaning agents of ProMax2 to emulsify the stains for a few seconds; when foaming occurs, scrub with steel or bristle brush evenly over entire stain. When sufficient amount of scrubbing has removed the stain, rinse off with water immediately to prevent bleaching and to neutralize solution.
ProMax2 should not be left on the driveway for more than the few seconds indicated. The aggressive chemical action of ProMax2 works instantly and needs to he neutralized with water to prevent bleaching or whitening of concrete.
- pH | Acidic
ProMax1 Driveway Cleaner can be applied by spray, steam gun, mobile scrubber, brush or mop. Use full strength or diluted 1 part products with 5 parts water.
ProMax2 contains natural citric acid, soap and surfactants. Avoid contact with skin and eyes. If contact should occur, flush well with water. If irritation persists get medical attention.
- #11702 | case/12 quarts
- #00702 | case/4 gallons
- #30702 | 5 gallon pail
- #50702 | 55 gallon drum
NOTICE: The above information and recommendations concerning this product are based upon our laboratory tests and field use experience, however since conditions of actual use are beyond our control, any recommendations or suggestions are made without warranty, express or implied. Manufacturer’s and seller’s sole obligation shall be to replace that portion of the product shown to be defective. Neither shall be liable for any loss, damage or injury, direct or consequential, arising out of the use of this product.