ProCool is a water-soluble medium to heavy duty machining coolant/lubricant. ProCool’s water-soluble cutting oils, are a perfect balance of oil and chemical detergents. It will provide you with a maximum of wok output at a minimum cost of solution, equipment wear and labor. ProCool contains a synthetic wetting agent, which reduces the surface tension of the coolant for better penetration. ProCool stops heat, lubricates, prevents rust and is non-smoking. ProCool is safe to use. It minimizes rusting of both machines and finished work by depositing a light rust preventive film. ProCool forms a clear, stable, water emulsion when diluted.
Equipment: Standard machining systems.
Usage: Use ProCool at recommended concentrations anywhere a general coolant or lubricant is needed. Apply by conventional methods.
- Drilling: 1:30 to 1:50R
- Reaming: 1:10 to 1:20
- Form | Liquid
- Color | Cool blue
- Solubility | Rapid and complete
- Flammability | None
ProCool is a mildly alkaline material. Avoid skin or eye contact with the concentrated material. If contact should occur, flush with water.
- #20888 | 4 gal per case
- #30888 | 5 gal pail
- #50888 | 55 gal drum
View Safety Data Sheet For This Product
NOTICE: The above information and recommendations concerning this product are based upon our laboratory tests and field use experience, however since conditions of actual use are beyond our control, any recommendations or suggestions are made without warranty, express or implied. Manufacturer’s and seller’s sole obligation shall be to replace that portion of the product shown to be defective. Neither shall be liable for any loss, damage or injury, direct or consequential, arising out of the use of this product.